Gel Coat Restoration

Gel coat is the hard, glossy outer skin of a fiberglass boat. Texas sun and lake water break it down over time: the surface goes chalky, faded and flat, and the color that used to turn heads looks tired and dull. That is oxidation — and it is exactly what gel coat restoration fixes.

We call the work gel coat correction — boats have gel coat, cars have paint, and the process is built for gel coat. It is not a wax job and it is not a quick buff. It is a proper, multi-step restoration that brings the gloss back from underneath the chalk.

Before: oxidized, chalky purple transom on an Eliminator boat
Before: oxidized, chalky gel coat.

Our 4-Step Gel Coat Restoration Process

Step 1 — Wash & Decontaminate

Every restoration starts with a deep foam wash that strips away lake grime, water spots, old wax and surface contamination. You can see it in the wash photo below — thick foam lifting the dirt off so we can see the true condition of the gel coat underneath.

Foam wash process shot — thick foam lifting grime off a boat before gel coat restoration
Step 1: foam wash and decontamination.

Step 2 — Gel Coat Correction (Cutting)

Using machine compounding, we cut away the dead, oxidized top layer of gel coat. This is the step that does the heavy lifting: the chalk comes off and the real color starts to come back. How aggressive this step is depends on how bad the oxidation is — light haze needs a light cut, heavy chalk needs more.

Step 3 — Polish to a Mirror Gloss

Once the oxidation is gone, we refine the surface with finer polishing until it is deep, wet and mirror-gloss — the kind of finish you can see your reflection in. This Eliminator’s bow shows what the polish step delivers.

After gel coat restoration: mirror-gloss bow of the Eliminator boat
After Step 3: mirror gloss.

Step 4 — Seal It with Ceramic Coating

Freshly restored gel coat will oxidize again fast if it is left bare. So we seal the new gloss with SB3 Marine ceramic coating — a hard, slick shield that blocks UV, makes water bead off and keeps lake grime from sticking. The shine lasts years, not months.

After gel coat restoration and ceramic coating: gloss side of the Eliminator boat
After Step 4: sealed and shining.

Is Gel Coat Restoration Right for Your Boat?

If your boat’s gel coat is chalky, faded, flat or rough to the touch, restoration is the answer — wax will not fix it, because wax just sits on top of dead gel coat. If your boat is newer and still glossy with no oxidation, skip straight to ceramic coating alone to protect the shine you already have.

What Does Gel Coat Restoration Cost?

Every boat is different — size, color, and how heavy the oxidation is all change the price. Send us a few photos of your boat through our quote form and we will give you an exact price. Heavily oxidized boats cost more because the correction work is heavier. Or call (877) 478-9274.

Mobile Service Across DFW

We come to you — your marina, boat ramp, storage lot or driveway anywhere around Lake Lewisville, Lake Grapevine, Eagle Mountain Lake, Lake Texoma, Lake Ray Hubbard, Joe Pool Lake, Lake Lavon and Possum Kingdom Lake. Prefer to drop off? Bring your boat to our Mansfield location. Gel coat restoration and ceramic coating for lightly or moderately oxidized boats is available mobile; heavily oxidized boats go to our Mansfield shop for correction.